Search

Hi,I am trying to LAG two of the 10 gig ports between an N2024 running OS6 and a S3124 running OS9. I can't seem talk between the two stacks. Maybe I'm getting tripped up by a naming convention change. I have include the port configs for the ports in question. If someone could help me out I'd really

Can I use the SFP+ ports 25 and 26 on a S3124 switch to connect an ME5 iSCSI storage using DAC cables?

Hi, I am trying to upgrade firmware on my 5N7Y5 card. I am using Network_Firmware_1R0W0_LN_22.5.7_A00 package on Linux. Unfortunately, the update fails at 5% with: ./nvmupdate64e -u -l -f Intel(R) Ethernet NVM Update Tool NVMUpdate version 1.39.68.2 Copyright(C) 2013 - 2023 Intel Corporation. Co

On servers I've set up recently, I'm getting Out Of Range messages during boot. I get the Dell "BIOS splash screen" for a few seconds, and then it's Out Of Range until partway through Windows showing the spinning wheel. This is causing problems, because I can't see menus to do boot-level configura

Our PowerStore 3000t came with 32 Gig fiber SFP+ connectors and says it should be able to do 8, 16, 24 and 32 gig. Our S4148F-ON will take up to 10 Gig SFPs. Do I have to have those specific speed SFPs on both units or is there any other compatible scenarios?

Once plugged in all power supply's come up green no no amber lights. 2 CMCs come up green and one has a blue light. The fans spin up to max speed and they do not stop spinning at top speed until the chassis is unplugged. The KVM card does not power up (I assume it was disabled internally or is broke

Hi there, can anyone tell me which switch is the successor for the N2000 series? I am looking for a not to pricy 48 Port Switch (optional with poe on all ports) best would be if they are stackable to limit the management effort

Hi, Documentation suggests when backing up a license you get a ".lic" file. But all the documentation I've seen for restoring/installing a license in OS10 suggests you need a ".xlm" format. What gives? I mean, imagine I have a switch with a current active license (permanent) and I want to backup

Hello All, Please I need you assitance if anyone had the same situation.I have plugged one Huawei (CE 5855-48) SFP 10G on the switch (Dell s5224F-ON), the problem is : the dell switch always showing that the Pluggable media present, SFP28 type is SFP28 25GBASE-SR-AOC,and the line protocol is down.

Hey, I am currently working with two switches. The first is a Dell Powerconnect 8024, and the second is Dell PowerSwitch N2048. I am trying to get these switches to communicate ideally within the same subnet and vlan. I have tried the default vlan1 on both with access/trunk/general ports connecting

Hello everyone. Our switch has expired. And I found 3 old model switches. Cisco SG2000-26, LINKSYS SGE2000 and a DELL PowerConnect 2824. We will use these 3 switches in our office for a temporary period. Then we will replace them with the latest CISCO Small Business switches. We know about networkin

The release notes state that the following are required for 9.14(2.23): Boot Selector image ver 3.21.0.0-6 or higher CPLD revision 15.2, active CPLD revision 12 and agent CPLD revision 5 However, I see no downloads for those subcomponents. The release notes state "The booted option is used to u

VLAN 100 is set as: OS10(conf-if-vl-100)# ipv6 address 1::1/120 port-channel Interface 1/1/1:1 is using VLAN 100: OS10(conf-if-eth1/1/1:1)# switchport trunk allowed vlan 100,200 From a Linux machine connected to that port-channel on VLAN 100, traceroute6 works (meaning it tells me 1::1, exists):

Hi, is it possible to apply an ACL to the management plane on a S5248F? We have moved the management interface into the management VRF as well as the snmp servers. I have tried the ip access-class on line vty and it still lets all IPs to log on to the switch. TIA Rich

(I am not an IT expert) I own a Dell EMC N1124T-ON switch and I'm looking to upgrade it (I prefer using the Web-UI rather than the CLI - If possible). Could anyone provide guidance on how to accomplish this? I'm interested in upgrading the operating system, firmware, and any other relevant componen

Hello, I need to install an OS in our MX5108N ethernet switch but not sure what the options are besides the OS10. Can someone please help out with some other options?  If it makes a difference.. we're using these with the MX750C blade server.  Truly appreciate it as always. Thank you

Hello, I have a couple of questions regarding two SW N1124T-ON units in a stack, connected via SFP. Despite searching the manual, I couldn't find a definitive answer. How does a stack member determine if the management unit is truly dead? Specifically, I'm concerned about scenarios where the SFP c

Is there a way to prevent the VLTi from managing certain VLAN traffic in OS9? This question expands on the discussion here. Essentially, we will have a couple VLANs designated for iSCSI traffic and we do not want that traffic traversing the VLTi. Based on the discussion mentioned above . . . I'm no

OS10 defaults to "Spanning tree enabled protocol rapid-pvst with force-version rstp". Does this mean that when it interacts with Cisco switches it uses Rapid-PVST+ but when it interacts with other manufacturer switches, it just uses RSTP? Thanks.

In OS10, a mechanism for this already exists: vlt delay-restore orphan-port enable. It allows you to define orphan ports and uses the delay-restore timer to delay the bring up of those ports. In OS9, there is only port-delay-restore which delays the bring up of all ports after a switch reboot. A pe